Setting Originals - Sharp AR-C260 Operation Manual

I I I I Standard original setting orientation
[Example 1]
Document feeder tray
Top
Bottom
[Example 2]
Document feeder tray
Bottom
* When the original is placed as shown in example 2 and stapling is to be performed, orient
the top of the original as shown below.
Document feeder tray
Top
I I I I Automatic copy image rotation - rotation copying
If the orientation of the originals and copy paper are different, the original image will be automatically rotated 90
and copied. (When an image is rotated, a message will be displayed.) If a function is selected that is not suitable
for rotation, such as enlarging the copy to greater than 8-1/2" x 11" (A4) size or staple sorting with the saddle
stitch finisher, rotation will not be possible.
[Example]
Orientation of original
Face down
GThis function operates in both the auto paper select or auto image mode. (Rotation copying can be disabled
with a key operator program. See page 13 of the key operator's guide.)
Document glass
Document glass
Top Top
Document glass
Bottom Bottom
Orientation of paper
Top
Bottom
Bottom
Top
Copy after rotation
Face down

SETTING ORIGINALS

Place originals in
document feeder tray or on
the document glass so that
the top and bottom of the
original is positioned
shown in the illustration. If not,
staples will be incorrectly
positioned and some special
features may not give the
expected result.
4-7
the
as
4
°