Removing An Original Misfeed; G Removing A Misfed Original From The Reversing Automatic Document Feeder; Removing A Misfed Original From The Reversing Automatic Document Feeder - Sharp AR-C260 Operation Manual

REMOVING AN ORIGINAL MISFEED

Removing a misfed original from the reversing automatic
document feeder
If an original misfeed occurs in the reversing automatic document feeder, follow the steps below to remove the misfed
original.
NOTES
G For misfeed removal in the main unit and other peripheral devices, see page 2-18.
G When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.
A
Removing misfeeds from each location
1
G Check location A
G Check location B
RADF exit area cover
7-2
C B
Open the cover of
the document
feeder and gently
remove the
original, taking
care not to tear it.
Remove the
misfed original. If
the original
difficult
remove, open the
RADF exit area
cover and then
remove the
original.
Open the RADF
exit area cover
and remove the
misfed original.
Check locations A, B, and C in the diagram at left to
remove the original.
G Check location C
Document feeding area cover
feeder cover and then remove the original.
2 Open and close the document feeder
cover.
is
to
However, this step is not necessary after a
misfeed is removed from location C.
A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key for color or
black and white copying as appropriate for the job
being resumed.
Open the
document feeder
cover and remove
the misfed
original. If the
original is difficult
to remove, open
the document
Opening and
closing the cover
clears the
misfeed display.
Copying cannot
be resumed until
this step is
performed.