Part Names And Functions; G Exterior; Exterior - Sharp AR-C260 Operation Manual

PART NAMES AND FUNCTIONS

Exterior

Without the duplex
bypass/inverter unit
installed.
Left tray (See page 5-5)
Finished sheets are deposited here.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Reversing automatic document feeder * (See
page 4-2)
Main switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Center tray (See page 5-5)
Finished sheets are deposited here.
Document cover*
Place the original on the document glass and
close the document cover before copying starts.
Original holder
Keep originals here.
* , , , , and
1-4
are peripheral devices. For a description of these devices, see page 1-6.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Stand/1 x 500 sheet paper drawer * (See page 2-
7)
Stand/3 x 500 sheet paper drawer * (See page 2-
7)
Duplex module/2 x 500 sheet paper drawer *
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for color (20 lbs. or 80 g/m
or approximately 500 sheets of SHARP standard
paper (20 lbs. or 80 g/m ).
2
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit * (See page 1-6)
),
2