Setting The Paper Type And Paper Size In The Bypass Tray - Sharp AR-C260 Operation Manual

LOADING PAPER

Setting the paper type and paper size in the bypass tray

Follow the steps below to set the type and size of the paper loaded in the bypass tray.
1 Touch the [PAPER SELECT] key.
(When copy mode is selected)
AUTO 8½x11
PAPER SELECT
100%
(When printer mode is selected)
8½x11
PAPER SELECT
CONDITION
SETTINS
2 Touch the key for the desired paper type.
(When copy mode is selected)
UTO
EXPOSURE
PLAIN
HEAVY PAPER
PAPER SELECT
TRANSPARENCY
100%
COPY RATIO
ENVELOPE
(When printer mode is selected)
PLAIN
HEAVY PAPER
PAPER SELECT
TRANSPARENCY
CONDITION
SETTINS
ENVELOPE
The steps that follow differ depending on the
paper type selected. Follow the steps for the
selected type.
G If you touched [PLAIN], go to step 6.
G If you touched [HEAVY PAPER], go to step 3
G If you touched [TRANSPARENCY], go to step 4.
G If you touched [ENVELOPE], go to step 5.
2-12
Touch the [PAPER
SELECT] key in the
main screen of the copy
mode.
Touch the [PAPER
SELECT] key in the
main screen of printer
mode.
The key for the selected
paper type will be
highlighted.
3 Touch [HEAVY PAPER 1] or [HEAVY
PAPER 2], and go to step 6.
HEAVY PAPER1 28+lbs.
HEAVY PAPER2 54+lbs.
For the types of heavy paper that can be used, see
page 2-10.
Touch [SPEED MODE] or [QUALITY MODE]
4
for the transparency film, and go to step 7.
SPEED MODE
QUALITY MODE
G SPEED MODE is for fast printing.
G QUALITY MODE is for a high quality image.
5 Touch the type of envelope, and go to step 7.
COM-10
MONARCH
DL
YOKEI-2
6 If you inserted a non-standard size of paper
in the bypass tray, remove the checkmark
from "ENABLE AUTO SIZE DETECTION" and
then touch the [EXTRA SIZE] tab. When the
screen opens, the X key will be highlighted.
Use the and touch keys to enter the X
dimension. If you inserted a standard size of
paper in the bypass tray, make sure that a
checkmark appears in the [ENABLE AUTO
SIZE DETECTION] checkbox.
ENABLE AUTO SIZE DETECTION
EXTRA SIZE
OK
(5 1/2 17)
X 5 ½
inch
(4 11 3/4)
Y
4
inch
EXTRA SIZE BASIC SETTING
range for the Y dimension is 4 to 11-3/4 inches
(100 to 297 mm).
Touch the [OK] key to complete the setting.
7
54 lbs.
80 lbs.
OK
C5
CHOKEI3
YOKEI-4
BASIC SETTING
Next touch the key to
highlight it and enter the
dimensions for Y.
The permitted range for
the X dimension is 5-1/2
to 17 inches (139 to 432
mm), and the permitted