G Recalling A Job Program; G Deleting A Stored Job Program; Recalling A Job Program; Deleting A Stored Job Program - Sharp AR-C260 Operation Manual

Recalling a job program

1 Press the [#/P] key.
2 Touch the desired
number key to recall the job from memory.
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL

Deleting a stored job program

1 Press the [#/P] key.
2 Touch the [STORE/DELETE] key to obtain
the storage register screen.
M NUMBER.
RECALL STORE/DELETE
3 Select a storage register number of the
program to be deleted.
EXIT
STORE/DELETE
storage register
When a number key is
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
If a number key for which
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
JOB PROGRAM MEMORY
3 Set the number of copies as needed and
press the [COLOR COPY START (
or [BLACK COPY START (
4 Touch the [DELETE] key.
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL DELETE STORE
REC LL STORE/DELETE
NOTE
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 15 of the
key operator's guide.)
)]
)] key.
Copying will start with
the settings of the
recalled job program.
When the [DELETE] key
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
deleted. If no other
programs are to be
deleted, touch the [EXIT]
key on the screen
displayed in step 3 to
exit the job program
mode.
6-27
6