Multi-Input - NEC MultiSync UN462A User Manual

SCHEDULE MENU
OFF TIMER
RESET

MULTI-INPUT

MULTI-INPUT MENU
KEEP MULTI PICTURE
MODE *1
MULTI PICTURE MODE
*1, *3
MULTI PICTURE
ACTIVE PICTURE
*1, *2
ACTIVE
ACTIVE FRAME
INPUT SELECT
*3, *5
PICTURE1
PICTURE2
PICTURE SIZE
*1, *2, *4
PICTURE POSITION
*1, *2, *4
PICTURE ASPECT
*1, *2, *4
TEXT TICKER
*1, *3
MODE
POSITION
SIZE
DETECT
INPUT SELECT
* : This function is released when selecting [SUPER] in [INPUT CHANGE], [MOTION] in [SCREEN SAVER], [TILE MATRIX] and [IMAGE FLIP] except for [NONE].
1
* : When [TEXT TICKER] is active or multi picture is [OFF], this function is not available.
2
* : When you select [OPTION] for input, this function depends on which Option Board installed in the monitor.
3
* 4 : This function is not available if [PIP] is set at [MULTI PICTURE MODE] and then [PICTURE1] is set at [ACTIVE PICTURE].
* 5 : This function is released when selecting [SUPER] in [INPUT CHANGE] or [TEXT TICKER] is active.
Set the monitor to power off after a preset time period. A time period between 1 to 24 hours may be set.
NOTE: [SCHEDULE] is not available if [OFF TIMER] is [ON].
Resets all SCHEDULE options back to factory setting, except for [DATE & TIME] and [DAYLIGHT SAVING].
Allows the monitor to remain in [MULTI PICTURE] and [TEXT TICKER] mode after powering off.
When Power is returned, [MULTI PICTURE] and [TEXT TICKER] appear without having to enter the OSD.
Sets multi picture mode.
When [OFF] is selected, one picture is displayed.
When [ON] is selected, several pictures are displayed. Select [PIP] or [PBP].
NOTE: When [ON] is selected, [TEXT TICKER], [CLOSED CAPTION], [TILE MATRIX], [MOTION] in [SCREEN
SAVER], [IMAGE FLIP] except for [NONE], [SUPER] in [INPUT CHANGE] is released.
When [MULTI PICTURE] is [OFF], [PICTURE 1] is the active picture. When [MULTI PICTURE] is [ON], select
an active picture from several pictures.
NOTE: This function depends on [MULTI PICTURE] setting.
The active picture is shown within a red frame.
Selects the Multi Picture input. Press the + button or - button to select the input.


NOTE: • This function is not available when [MULTI PICTURE] is [OFF].

•
When changing input signal for the active picture, after selecting an input press SET/POINT
ZOOM button.
Sets the Active Picture size.
Press the SET/POINT ZOOM button to adjust the picture size. Press + button or CH/ZOOM+ button to expand.
Press - button or CH/ZOOM- button to reduce.
Sets the Active Picture location.
Pressing the + button moves the Active Picture to the right, and pressing the - button moves it to the left.
Pressing the  button moves the Active Picture up, and pressing the  button moves it down.
Selects the Active Picture frame aspect.
To change aspect ratio of the screen image, see
Shows a cropped portion of [PICTURE2] either horizontally or vertically over the image of PICTURE1.
This can be used to display, for example, a text ticker application.
The Text Ticker portion of the [PICTURE2] source that is displayed will be the top (horizontal) or left side
(vertical).


NOTE: • When [TEXT TICKER] is set, [MULTI PICTURE MODE] and [STILL] are not available.

•
[TEXT TICKER] is released if following menu is activated: [MULTI PICTURE MODE],
[TILE MATRIX], [SCREEN SAVER], [IMAGE FLIP], [SUPER] in [INPUT CHANGE],
[CLOSED CAPTION].

•
When this function is active, [POINT ZOOM] and [STILL] are not available.
Enables Text Ticker and allows you to set Horizontal or Vertical direction.
Selects the location of the Text Ticker on the screen.
Determines the size of the Text Ticker in relationship to the overall screen size.
Enables auto-detection of the Text Ticker.
Set input signal for [PICTURE1], [PICTURE2].
page 35.
English−110