Control - NEC MultiSync UN462A User Manual

CONTROL

CONTROL MENU
NETWORK INFORMATION
LAN
IP SETTING
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS
DNS PRIMARY
DNS SECONDARY
CHANGE PASSWORD
SECURITY
PASSWORD
SECURE MODE
OFF
START-UP LOCK
CONTROL LOCK
BOTH LOCK
Shows the current network settings.
NOTE: When changing any LAN settings, you need to wait several seconds until modified LAN settings are
applied.
Enabling this option automatically assigns an IP address to the monitor from your DHCP server.
Disabling this option allows you to enter a fixed IP address and subnet mask data obtained from your network
administrator.
NOTE: Consult your network administrator for the IP address when [AUTO] is selected for [IP SETTING].
Set your IP address for the monitor connected to the network when [MANUAL] is selected for [IP SETTING].
Set your subnet mask data for the monitor connected to the network when [MANUAL] is selected for
[IP SETTING].
Set your default gateway for the monitor connected to the network when [MANUAL] is selected for
[IP SETTING].
NOTE: Enter [0.0.0.0] to delete the setting.
Set the IP addresses of DNS servers.
[AUTO]: The DNS server, which is connected with the monitor, will automatically assign its IP address.
[MANUAL]: Manually enter the IP address of the DNS server which is connected with the monitor.
NOTE: Consult your network administrator for the IP address when [AUTO] is selected for [DNS].
Enter the primary DNS server settings of the network connected with the monitor.
NOTE: Enter [0.0.0.0] to delete the setting.
Enter the secondary DNS server settings of the network connected with the monitor.
NOTE: Enter [0.0.0.0] to delete the setting.
Allows the security password to be changed.
NOTE: The factory preset password is [0000].
Setting for security.
NOTE: This function is for restricting displaying on this monitor.
This is not for restricting or preventing access from virus to this monitor through the connected external
devices or signal inputs.
Input a security password.
The security password is not required when the monitor power is on.
The security password is required when the monitor power is on.
The security password is required when a remote control button or a control button on the monitor is pressed.
The security password is required when either the monitor is powered on, or a remote control button or a
control button on the monitor is pressed.
English−117