NEC MultiSync UN462A User Manual page 122

CONTROL MENU
IR LOCK SETTINGS
MODE SELECT
UNLOCK
ALL LOCK
CUSTOM LOCK
KEY LOCK SETTINGS
MODE SELECT
UNLOCK
ALL LOCK
CUSTOM LOCK
Prevents the monitor from being controlled by the wireless remote control.
When [ACTIVATE] is selected, all settings are activated.


NOTE: • [IR LOCK SETTINGS] is a function intended only for the wireless remote control buttons.
This function does not lock out access to the buttons on the monitor.

•
To return to normal operation, press the DISPLAY button on the remote control and hold it down
for more than 5 seconds.
Selects the mode [UNLOCK], [ALL LOCK] or [CUSTOM LOCK].
All buttons on the remote control are available for normal operation.
Locks all remote control buttons.
Selects which buttons to be locked from [POWER], [VOLUME], and [INPUT] button.
Except for [CUSTOM LOCK] settings, other buttons on the remote control are locked.
POWER: When [LOCK] is selected, the POWER ON button is locked.
VOLUME: When [UNLOCK] is selected, set the minimum and maximum volume between VOL.0 to
VOL.100.
VOL+ button and VOL- buttons are only available from the minimum volume to the maximum
volume you set.
When [LOCK] is selected, VOL+ button and VOL- buttons are locked.
INPUT: When [UNLOCK] is selected, choose up to three buttons from [DVI], [HDMI1], [HDMI2],
[DisplayPort1], [DisplayPort2], [VGA (RGB/YPbPr)], [VIDEO], [MEDIA PLAYER], [OPTION]
which you prefer to be unlocked.
The unselected buttons are locked. When [LOCK] is selected, all [INPUT] buttons are locked.
CHANNEL: To lock channel buttons on the remote control, select it to [LOCK] then press [ACTIVE],
CH/ZOOM+ button and CH/ZOOM- button are locked.
Prevents the monitor from being controlled by the button on the monitor.
When [ACTIVATE] is selected, all of the settings are activated.


NOTE: • [KEY LOCK SETTINGS] is a function intended only for the buttons of the monitor. This function
does not lock out access to all buttons on the remote control.

•
To activate the control key lock function, press the  button and the  button and hold down
simultaneously for more than 3 seconds. To resume user mode, press the  button and the
 button and hold simultaneously for more than 3 seconds.
Selects the mode [UNLOCK], [ALL LOCK] or [CUSTOM LOCK].
All buttons are available for normal operations.
Locks all remote control buttons.
Selects which buttons to be locked from [POWER], [VOLUME], and [INPUT] button.
Except for [CUSTOM LOCK] settings, other buttons on the remote control are locked.
POWER: When [LOCK] is selected, the
VOLUME: When [UNLOCK] is selected, set the minimum and maximum volume between VOL.0 to
VOL.100.
The + button and the - button are only available from the minimum volume to the maximum
volume you set.
When [LOCK] is selected, the + button and the - button are locked.
INPUT: When [UNLOCK] is selected, the INPUT/SET button is unlocked.
CHANNEL: To lock channel buttons on the remote control, select it to [LOCK] then press [ACTIVE], the
 button and the  button are locked.
button is locked.
English−118