NEC MultiSync UN462A User Manual page 113

SCHEDULE MENU
INPUT
PIC. MODE
*1
Select one item from below (only one item is available).
DATE
EVERY DAY
EVERY WEEK
WEEKDAY
WEEKEND
HOLIDAY
SCHEDULE LIST
HOLIDAY SETTINGS
No.
YEAR
MONTH
DAY
WEEK
END DAY
SET/DELETE
WEEKEND SETTING
WEEKEND
DATE & TIME
YEAR
MONTH
DAY
TIME
CURRENT DATE TIME
DAYLIGHT SAVING
DAYLIGHT SAVING
BEGIN MONTH
END MONTH
TIME DIFFERENCE
* : If SPECTRAVIEW ENGINE is ON, this function is grayed out.
1
Select which video input to use for the schedule. To keep the active input when the schedule starts, make sure
the setting is [--].
If you do select a specific input, set [ON] at [POWER].
Select the picture mode to use for the schedule. To keep the active picture mode when the schedule starts,
make sure the setting is [--].
If you do select a specific PIC. MODE, set [ON] at [POWER].
Select this option if the schedule is only going to run on one day or it is an irregular schedule.
Select this option to have the schedule repeat every day.
Select this option to have the schedule repeat every week.
Select this option to have the schedule run on weekdays only.
NOTE: "Weekdays" are any day that is not a weekend day or a holiday day. Days which are not selected in the
[WEEKEND] and [HOLIDAY] settings are automatically weekdays.
Select this option to have the schedule run on weekends only.
Note: "Weekend" days are chosen in the [WEEKEND SETTING] menu.
Select this option to have the schedule run only on the selected holiday.
NOTE: "Holiday" days are added in the [HOLIDAY SETTINGS] menu.
Shows the list of schedules and their current settings. Press the + or - button to scroll through the
30 schedules.
Defines which days are holidays for the schedule settings. Press the + or - button to cycle through the
numbers to configure different holidays.
Set [YEAR] and [MONTH].
Select [DAY] or [WEEK].
[DAY]: Set a day.
[WEEK]: Set a week and the day of the week.
If you set [--] at [MONTH] or [YEAR], every month or year of the day you select is set as a holiday.
Set the end of holiday date. If you schedule beyond a year, please separate the schedule per year.
NOTE: If [DAY] is not set, [END DAY] is not available. If your holiday setting includes [--] for year or month,
[END DAY] is not available.
Sets or deletes a schedule.
Set the day of the week.
Sets the date and time. Date & time must be set in order for the [SCHEDULE] function to operate.
NOTE: If the monitor's main power has been turned off for two weeks, the [DATE & TIME] setting goes back to
the default setting and the clock function stops working.
Sets the year for the real-time clock.
Sets the month for the real-time clock.
Sets the day for the real-time clock.
Sets the time for the real-time clock.
Shows the current date and time.
Sets daylight savings on or off.
NOTE: Please set the [TIME & DATE] setting first if you change the [DAYLIGHT SAVING] setting.
If ON is selected, please set daylight savings settings below.
Set daylight savings beginning date.
Set daylight savings ending date.
Set the time difference.
English−109