Multi Input - NEC MultiSync C431 User Manual

HOLIDAY SETTINGS
No. Creates holiday schedule for the monitor.
YEAR Set YEAR and MONTH.
MONTH Select DAY or WEEK.
DAY DAY: Set a day.
WEEK WEEK: Set a week and the day of the week.
If you set [--] at MONTH or YEAR, every month or year of the day you set is set as a holiday.
END DAY Set the end of holiday date. If you schedule beyond a year, please separate the schedule per year.
NOTE: If DAY is not set, END DAY is not available. If your holiday setting includes [--] for year or month,
END DAY is not available.
SET/DELETE Sets or deletes a schedule.
WEEKEND SETTING
WEEKEND Set the day of the week.
DATE & TIME Sets the date, time, and daylight savings region. Date & time must be set in order for the "SCHEDULE" function
to operate. See page 30.
NOTE: If the monitor's main power has been turned off for two weeks, the DATE & TIME setting goes back to the
default setting and the clock function stops working.
When turning on the monitor after the clock function stops, the LED indicator glows red and blue. This indicates
that the clock function is back to its default setting. Please set DATE & TIME again.
YEAR Sets the year for the real-time clock.
MONTH Sets the month for the real-time clock.
DAY Sets the day for the real-time clock.
TIME Sets the time for the real-time clock.
CURRENT DATE TIME Shows the current date and time.
DAYLIGHT SAVING Sets daylight savings on or off.
NOTE: Please set the TIME & DATE setting fi rst if you change the DAYLIGHT SAVING setting.
DAYLIGHT SAVING If ON is selected, please set daylight savings settings below.
BEGIN MONTH Set daylight savings beginning date.
END MONTH Set daylight savings ending date.
TIME DIFFERENCE Set the time difference.
OFF TIMER Set the monitor to power off after a pre-set time period. A time period between 1 to 24 hours may be set.
NOTE: SCHEDULE is not available if OFF TIMER is ON.
RESET Resets the following settings within the SCHEDULE menu back to factory setting: DATE & TIME and DAYLIGHT
SAVING.

MULTI INPUT

INPUT DETECT Selects the method of input detection the monitor uses when more than one signal source is connected.
NONE The Monitor will not search for signals at the other video input ports.
FIRST DETECT When the current video input signal is not present, the monitor searches for a video signal from another video
input port. If a video signal is present in the other input, the monitor switches from the current video source to this
active video source automatically.
The monitor will not look for any other video signals while the current video source is present.
CUSTOM DETECT Sets the priority of input signals.
When CUSTOM DETECT is selected, the monitor searches on pre-set inputs only.
When you use digital input (DisplayPort, HDMI1, HDMI2 and HDMI3), other digital input is not detected.
When you use analog input (VGA or VIDEO), other analog input is not detected.
English-31