Input; Picture - NEC MultiSync UN462A User Manual

INPUT

INPUT MENU
DVI
HDMI1
HDMI2
DisplayPort1
DisplayPort2
VGA (RGB/YPbPr)
VIDEO
MP
COMPUTE MODULE* 1
OPTION*
2
* : This function is only available when Raspberry Pi Compute Module Interface Board and Raspberry Pi Compute Module are installed. See
1
* 2 : This function depends on which option board you are using. This function is only available when option board is installed.

PICTURE

PICTURE MENU
PICTURE MODE
EMULATION
*1
3D LUT EMULATION
COLOR VISION EMULATION
* : This function is available when [SPECTRAVIEW ENGINE] is set to [ON].
1
Selects the input signals source.
SpectraView Engine = OFF: Predefined picture modes [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA],
[CUSTOM1], [CUSTOM2].
SpectraView Engine = ON: Five customizable Picture Mode memories [1], [2], [3], [4] or [5].
See page 47.


NOTE: • If [COLOR TEMPERATURE ] of the [WHITE] is set to [NATIVE] when the [SPECTRAVIEW
ENGINE] is [ON], [WHITE(x,y)] is not available.

•
Enable to set the [SYSTEM GAMMA], please set [HDR-Hybrid Log].

•
Enable to set the [PEAK LUMI.], please set [HDR-ST2084(PQ)].

•
Enable to set the [CUSTOM VALUE], please set [Custom] for [GAMMA].
The 3D LUT (Look Up Table) is a three-dimensional table that maps colors into different color spaces.
The SpectraView Engine inside this monitor allows complex color gamuts, such as those for color printers,
to be emulated on the monitor directly. For example, this allows print previews or cinematic or color grading
effects to be performed within the monitor itself.
This feature is used with supporting software. 3D LUTs are uploaded to the monitor via application
software.
ON: Enables/Activates the 3D LUT function for the selected picture mode.
OFF: Disables/Deactivates the 3D LUT function for the selected picture mode.
Compare: In this mode, colors that lie outside the boundaries of the 3D LUT are shown in gray. It is
useful for determining out of gamut colors.
Previews various typical human vision deficiencies and is useful for evaluating how people who have such
deficiencies will perceive colors.
This preview is available in types:
• P (Protanopia)
• D (Deuteranopia)
• T (Tritanopia)
Grayscale can be used for evaluating contrast legibility.
NOTE: Depending on the vision of the user, including those with color vision deficiency, there will be a
variation in how the screen's color is seen and experienced. A simulation is used to illustrate the view of
those with a color vision deficiency. It is not their actual view. The simulation is a reproduction of those
with a strong color vision mode of type P, type D or type T. People with a slight color vision deficiency will
experience little to no difference compared to those with normal color vision.
English−103
page 100.