2N Indoor Talk User Manual page 77

2N TELEKOMUNIKACE a.s., www.2n.cz
Call muting
press
Door
unlocking
press
Parental
lock
press
deactivation
simultaneously
for 3 seconds
Ringing
volume up
press
Ringing
volume
press
down
The device goes over to the
silent (DND) mode. The call
answering button is flashing
blue. The call end button is
shining red. The other buttons
are backlit according to the set
brightness level. The volume
control, microphone muting and
DND buttons are inactive.
Door unlocking is signalled by a
green flash of the lock button
and a tone. The other buttons
do not change their states. The
active call is terminated in 10 s if
set so.
The buttons are activated. The
device gets in the Incoming call
state.
Each press increases the ringing
volume level. The state is
signalled by a beep and louder
ringtone. When the maximum
volume is reached, the button
starts flashing.
Each press decreases the
ringing volume level. The state is
signalled by a beep and more
silent ringtone. When the
minimum volume is reached, the
button starts flashing.
77/90