2N Indoor Talk User Manual page 54

Enable beep at keystroke – enable touch panel keystroke beep signalling
Key Beep Volume – set the key beep volume. The volume values are relative
against the set master volume.
Warning Tone Volume – set the volume of warning and signalling tones
described in the Signalling of Operational Statuses section. The volume values
are relative against the set master volume.
Suppress Warning Tones – suppress signalling of the following operational
states. Internal application started, IP address received and IP address lost.
User sound volume – set the volume of user sounds. The volume values are
relative against the set master volume.
2N TELEKOMUNIKACE a.s., www.2n.cz 54/90