2N Indoor Talk User Manual page 48

3.2.2.2 User Sounds
®
2N Indoor Talk signals variable operational statuses with a sequence of tones. If
standard signalling tones do not meet your requirements, you can modify them.
The device allows you to modify sound signalling for the following states:
1. Ringtone before call pickup
a.
Ringing tone
b.
Busy tone
c.
Call end signalling
d.
Doorbell
e.
Sound Mapping
Ringtone before answering call – set the ringtone to be played before an
incoming call is picked up (device ringtone).
Ringback Tone – set the tone to be played while the phone is ringing that called
user's. The PBX ringing tone is preferred to the user ringing tone in the device.
Call Busy Tone – set the tone to be played when the called user is busy.
2N TELEKOMUNIKACE a.s., www.2n.cz 48/90