2N Indoor Talk User Manual page 69

3.2.4.5 Syslog
®
2N Indoor Talk allows you to sends syslog messages including relevant device state
and process information to a syslog server for recording and further analysis or
auditing of the device observed. it is unnecessary to configure this service for
common operations.
Parameter List
Send Syslog Messages – enable sending of syslog messages to the Syslog server.
Make sure that the server address is valid.
Server Address – IP/MAC address of the server on which the syslog recording
application is running.
Severity Level – set the detail level of the messages to be sent.
2N TELEKOMUNIKACE a.s., www.2n.cz 69/90