2N Indoor Talk User Manual page 26

Having installed the
3.
Microsoft Windows Start menu.
Once started, the application begins to automatically search for all the 2N IP
4.
intercoms in the LAN including their smart extensions (
Indoor Touch ), which are DHCP/statically assigned IP addresses. All the devices
are displayed in a table.
Select the 2N
5.
Browse... to open the
for configuration. To change the device IP address, select
required static IP address or activate DHCP. The default configuration password
is 2n. If the found device is grey highlighted, its IP address cannot be configured
using this application. In that case, click Refresh to find the device again and
check whether multicast is enabled in your network.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N IP Network Scanner
®
2N IP Network Scanner Window
®
Indoor Talk device to be configured and right-click it. Select
®
2N Indoor Talk
®
2N IP Network Scanner IP Address Change
, start the application using the
administration web interface login window
®
2N Indoor Talk 2N ,
Config and enter the
26/90
®