2N Indoor Talk User Manual page 41

SIP 1 and SIP 2
®
2N Indoor Talk helps you configure one SIP account.
Display name – set the name to be displayed on the called user's phone as CLIP.
Phone number (ID) – set your device phone number (or another unique ID
composed of characters and digits). Together with the domain, this number
uniquely identifies the devices in calls and registration.
Domain – set the domain name of the service with which the device is registered.
Typically, it is identical with the SIP Proxy or Registrar address.
Test call – display a dialogue window to make a test call to the selected phone
number, see below.
Use Authentication ID – select the use of an alternative ID for authentication.
Otherwise, the Phone number value from the previous section is used for
authentication.
Authentication ID – set the alternative user ID for device authentication.
Password – set the authentication password. If your PBX requires no
authentication, the parameter will not be applied.
2N TELEKOMUNIKACE a.s., www.2n.cz 41/90