2N Indoor Talk User Manual page 76

Microphone press
muting
Call volume press
up
Call volume press
down
Outgoing Call
Outgoing call
2N TELEKOMUNIKACE a.s., www.2n.cz
The microphone is muted, the button is flashing yellow. The lock, call
end and volume control buttons are active. The microphone muting
deactivation is inactive. DND is inactive.
Each press increases the volume level. The state is signalled by a
beep. When the maximum volume level is reached, the button starts
flashing.
Each press decreases the volume level. The state is signalled by a
beep. When the minimum volume level is reached, the button starts
flashing.
Call to
position 1
press
destination
shortly
Call to
position 2
press
destination
a long time
The call start is signalled by a
change of the call answering
button colour. When the called
user answers the call, the device
transits into the At call state. If
the call is answered within a
timeout, the device returns to
the Relax mode. The call/lock
/hang-up buttons are
illuminated blue/yellow/red
respectively. The muting and
DND buttons are available, the
others are inactive.
The call start is signalled by a
change of the call answering
for
button colour. When the called
user answers the call, the device
transits into the At call state. If
the call is answered within a
timeout, the device returns to
the Relax mode. The call/lock
/hang-up buttons are
illuminated blue/yellow/red
respectively. The muting and
DND buttons are available, the
others are inactive.
76/90