2N Indoor Talk User Manual page 67

3.2.4.4 Auto Provisioning
®
The 2N Indoor Talk help you update firmware and configuration manually, or
automatically from a storage on a TFTP/HTTP server selected by you according to
predefined rules.
®
You can configure the TFTP and HTTP server address manually. The 2N Indoor Talk
support automatic identification of the local DHCP server address (Option 66).
My2N / TR069
Use this tab to enable and configure remote device management via the TR-069
protocol. TR-069 helps you reliably configure device parameters, update and back up
configuration and/or upgrade device firmware.
The TR-069 protocol is utilised by the My2N cloud service. Make sure that TR-069 is
enabled and Active profile set to My2N to make your intercom log in to My2N
periodically for configuration.
This function helps you connect the device to your ACS (Auto Configuration Server).
In this case, the connection to My2N will be disabled in the device.
My2N / TR069 Enabled – enable connection to My2N or another ACS server.
2N TELEKOMUNIKACE a.s., www.2n.cz 67/90