2N Indoor Talk User Manual page 18

Cut a circular hole of the diameter of 103 mm and depth of 50 mm before installation.
It is assumed that all necessary cables of the maximum length of 25 cm will lead to the
hole. Put the flush mounting box in the hole to make sure that the hole is deep
enough. If the hole complies with the box size, wall in the box and level the box using
a water level on the holding clips. When the mortar hardens, break off the clips and
cap the box with the cover provided. Use anchoring elements to fix the device into
plasterboard.
Use a 2.5 mm hexagon key wrench (part of
Indoor Talk into the flush mounting box.
Poznámka
Respect the local standards concerning installation of electronic devices
on flammable materials while flush mounting
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Indoor Talk delivery
®
2N Indoor Talk
®
) for fitting 2N
.
18/90