2N Indoor Talk User Manual page 64

Parameter List
Synchronise with browser – click the button to synchronise the device time with
your current PC time value.
Time Zone – set the time zone for your installation site to configure time shifts
and summer/winter time transitions.
Time Zone Rule – set the time zone rule manually if your device is installed on a
site that is not included in the Time zone list. The time zone rule is only applied if
the Time zone parameter is set to
Use NTP Server – enable the use of the NTP server for internal time
synchronisation.
NTP Server Address – set the IP address/domain name of the NTP server used
for the device internal time synchronisation.
NTP Time State – display the state of the last local time synchronisation attempt
via NTP: Unsynchronised. Synchronised, Error.
2N TELEKOMUNIKACE a.s., www.2n.cz
Manual settings .
64/90