Connection Configuration - IntesisBox IBOX-MBS-KNX-100 User Manual

Modbus Server – KNX
®
IntesisBox

5.1.1 Connection configuration

Two subsets of information are configured using this window, the Modbus TCP & RTU
parameters of the IntesisBox
Modbus interface configuration parameters:
1
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
® , and the parameters of the KNX interface.
Figure 4.2 Configuration: Connection Tab
Figure 4.3 Modbus TCP & RTU interface Configuration
User's Manual r18 eng
2
3
4
.
5
.
6
.
7
.
8
.
9
.
10
URL http://www.intesisbox.com
Email info@intesisbox.com
tel +34 938047134
17 /
31