Table of Contents
Advertisement
Modbus Server – KNX
®
IntesisBox
6.1 Integration of IntesisBox
As explained the IntesisBox
be needed to integrate the gateway in the ETS project, for example to allow the line
couplers have a correct configuration of their filter tables. To do so a Dummy device can be
used in ETS to simulate the IntesisBox
addresses used in IntesisBox
The dummy device can be downloaded from:
http://www.intesis.com/down/eib/Dummy_Intesis.zip
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
6. IntesisBox
®
in ETS
®
is configured with the LinkBoxMB but in some projects it might
®
and associate also to this Dummy device all group
®
.
®
and ETS
URL
http://www.intesisbox.com
Email
info@intesisbox.com
tel
+34 938047134
User's Manual r18 eng
28 /
31
Advertisement
Table of Contents
Need help?
Do you have a question about the IBOX-MBS-KNX-100 and is the answer not in the manual?
Questions and answers