Description; Introduction - IntesisBox IBOX-MBS-KNX-100 User Manual

Modbus Server – KNX
®
IntesisBox

1.1 Introduction

IntesisBox ® Modbus Server - KNX is a communication gateway for KNX TP-1 (EIB) systems
to Modbus slave (RTU and TCP).
This gateway allows to integrate KNX equipment inside a supervision/control/automation
system through PLC, SCADA, and in general through any device or system with Modbus
master (TCP or RTU) interface.
The aim of this integration is to make accessible KNX system signals and resources from a
Modbus master device or system, as if it was a part of the own Modbus system and vice-
versa. For this, IntesisBox Modbus Server - KNX acts as a Modbus slave device in its
Modbus interface, allowing a Modbus master device to read and write its internal points.
And from the KNX system point of view, the gateway simulates a KNX device and acts as if
it was one more device into the KNX system.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU

1. Description

User's Manual r18 eng
URL http://www.intesisbox.com
Email info@intesisbox.com
tel +34 938047134
5 / 31