Quick Set-Up - Danfoss vlt series Operating Instructions Manual

How to Programme
Another easy way of commissioning the frequency
converter is by using the smart application set-up (SAS),
which can also be found by pressing [Quick Menu]. To set
up the applications listed, follow the instructions on the
successive screens.
The [Info] key can be used throughout the SAS to see help
information for various selections, settings, and messages.
4 4
The following 3 applications are included:
•
Mechanical brake.
•
Conveyor.
•
Pump/fan.
The following 4 fieldbusses can be selected:
•
PROFIBUS.
•
PROFINET.
•
DeviceNet.
•
EtherNet/IP.
NOTICE
The frequency converter ignores the start conditions
when SAS is active.
NOTICE
The smart set-up runs automatically on the first power-
up of the frequency converter or after a reset to factory
settings. If no action is taken, the SAS screen automat-
ically disappears after 10 minutes.

4.2 Quick Set-up

0-01 Language
Option:
[0] English
*
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
62
®
VLT AutomationDrive FC 302
Function:
Defines display language. The frequency
converter is delivered with 4 different
language packages. English and German
are included in all packages. English
cannot be erased or manipulated.
Part of language packages 1–4
Part of language packages 1–4
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 2
Part of language package 1
Part of language package 4
Danfoss A/S © 04/2016 All rights reserved.
0-01 Language
Option: Function:
[27] Greek Part of language package 4
[28] Bras.port Part of language package 4
[36] Slovenian Part of language package 3
[39] Korean Part of language package 2
[40] Japanese Part of language package 2
[41] Turkish Part of language package 4
[42] Trad.Chinese Part of language package 2
[43] Bulgarian Part of language package 3
[44] Srpski Part of language package 3
[45] Romanian Part of language package 3
[46] Magyar Part of language package 3
[47] Czech Part of language package 3
[48] Polski Part of language package 4
[49] Russian Part of language package 3
[50] Thai Part of language package 2
[51] Bahasa Part of language package 2
Indonesia
[52] Hrvatski Part of language package 3
1-20 Motor Power [kW]
Range: Function:
NOTICE
Size [ 0.09 -
related 3000.00
*
This parameter cannot be adjusted
kW]
while the motor is running.
Enter the nominal motor power in kW
according to the motor nameplate data.
The default value corresponds to the
nominal rated output of the frequency
converter.
This parameter is visible in the LCP if
parameter 0-03 Regional Settings is set to
[0] International.
1-22 Motor Voltage
Range: Function:
Size [ 10 - Enter the nominal motor voltage
related 1000 V] according to the motor nameplate
*
data. The default value corresponds to
the nominal rated output of the
frequency converter.
MG34Q402