Terminal Locations; Inverter And Rectifier, Enclosure Sizes F8, And F9 - Danfoss vlt series Operating Instructions Manual

How to Install
3.2.4 Terminal Locations, F8–F15
The F enclosures are available in 8 different sizes. The F8 consists of the rectifier and inverter modules in 1 cabinet. The F10,
F12, and F14 consist of a rectifier cabinet on the left and an inverter cabinet on the right. The F9, F11, F13, and F15 have
the option cabinet added to the F8, F10, F12, and F14, respectively.
3 3

3.2.4.1 Inverter and Rectifier, Enclosure Sizes F8, and F9

1
2
3
4
Illustration 3.13 Terminal Locations Inverter and Rectifier, Enclosure Sizes F8, and F9. The gland plate is 42 mm (1.65 in) below 0.0
level.
20
1
239.6 [ 9.43 ]
160.0 [ 6.30 ]
56.6 [ 2.23 ]
0.0 [ 0.00 ]
Left side view
Front view
Right side view
Ground bar
Danfoss A/S © 04/2016 All rights reserved.
®
VLT AutomationDrive FC 302
2
U/T1 96 V/T2 97
R2/L12 91-1 S2/L22 92-1 T2/L32 93-1
R1/L11 91 S1/L21 92 T1/L31 93
W/T3 98
4
3
MG34Q402