Connecting To The Bottom Connector Panel; Connecting To The Front Connector Panel; Viewing A Connected Computer Or Other Device's Input - SMART Board SBID-MX165 Installation And Maintenance Manual

CHAPTER 3
CONNECTING POWER AND DEVICES

Connecting to the bottom connector panel

The bottom connector panel includes a video connector and
USB connector:
VGA: This connector can accommodate a VGA cable for
l
video.
USB Type-B: This connector can accommodate a USB
l
cable for touch control for computers connected to HDMI 1,
HDMI 2 or VGA.
NOTE
When connecting a computer to the VGA connector, use the Stereo 3.5 mm in connector for
audio.

Connecting to the front connector panel

In addition to the three sets of video connectors on the side and
bottom connector panel, there is one set of computer
connectors on the front control panel:
HDMI 3: This set of connectors can accommodate a
l
USB cable for touch control and an HDMI cable for video
and audio. This input supports HDMI 1.4 with HDCP 1.4.
USB Type-B: This connector can accommodate a USB
l
cable for touch control for computers connected to HDMI
3.

Viewing a connected computer or other device's input

Users can use the Input app or tap the Input button to open the input selection menu. Tap an input
source to view the computer or other device's input on the display.
For information about viewing a connected device's input, see the SMART Board MX100 series
interactive display user's guide (smarttech.com/kb/171289).
24 smarttech.com/kb/171288