Status Light; Ambient Light Sensor - SMART Board SBID-MX165 Installation And Maintenance Manual

CHAPTER 1
WELCOME
No. Name
7 [Right]
8 [Down]
9 OK
10 VOL + / VOL -
11 BACK
12 SOURCE
13 AUDIO
14 ZOOM
15 SYS
16 PLAY
17 PAUSE
18 STOP
19 PREV
20 NEXT
21 BACK
22 SPEED

Status light

The status light blinks green and red when it registers a button being pressed on the remote
control.
When the status light is red, the display is in a low power state. To wake the display, press the
Power button on the front control panel or POWER on the remote control.

Ambient light sensor

The ambient light sensor can detect the room brightness and adjust the display's brightness. Make
sure Auto is enabled in Brightness and volume in Settings. See Brightness and volume on page 58.
7 smarttech.com/kb/171288
Function
Move selection right
Move selection down
Confirm selection
Increase or decrease volume
Return
Open the input source menu
Change audio mode
Change aspect radio
Open the e³ experience and the display's
settings
Play videos and audio, and view picture
slideshows
Pause videos, audio and picture
slideshows
Stop videos, audio and picture slideshows
Move to the next picture or skip to next
video or audio file
Move to the previous picture or return to
the previous video or audio file
Rewind playback
Fast forward playback