Resetting The Display; Removing And Transporting The Display - SMART Board SBID-MX165 Installation And Maintenance Manual

CHAPTER 6
MAINTAINING THE DISPLAY
In some situations, such as when you need to transport the display or clean its screen, you need to
turn the display off for a period of time. You can turn it back on after.
To turn the display off
1. Press and hold the Power button
To turn the display back on
Press the Power button

Resetting the display

You can reset the display using the switch on the back of the panel.
To perform a factory reset, see Restore factory settings on page 59. A factory reset returns all
options to their default values.
To reset the display
1. Flick the switch to the OFF (O) position.
2. Flick the switch to the ON (|) position.
The display resets.

Removing and transporting the display

If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.
To remove the display safely, use two or more trained installers.
WARNING
Do not attempt to move the display by yourself. The display is very heavy.
l
Do not move the display by connecting a rope or wire to the handles on the back. The
l
display can fall and cause injury and product damage.
40 smarttech.com/kb/171288
on the front control panel for two seconds.
on the front control panel.