Important Information - SMART Board SBID-MX165 Installation And Maintenance Manual

Important information

IMPORTANT
There are critical software updates for the display that you need to install to ensure the display is
fully functional and provides the best experience. Connect the display to a wired or wireless
network with Internet access to automatically download and apply these updates as well as
future updates.
WARNING
Failure to follow the installation instructions shipped with the SMART product could result in
l
injury and product damage which may not be covered by the warranty.
Do not open or disassemble the SMART product. You risk electrical shock from the high
l
voltage inside the casing. Opening the casing also voids the warranty.
Do not stand (or allow children to stand) on a chair to touch the surface of the SMART
l
product. Rather, mount the product at the appropriate height.
To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
l
moisture.
If the SMART product requires replacement parts, make sure the service technician uses
l
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
Ensure that any cables that cross the floor to the SMART product are properly bundled and
l
marked to avoid a trip hazard.
Do not insert objects inside the cabinet ventilation holes, because they could touch
l
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
Do not place heavy objects on the power cable. Damage to the cable could cause shock,
l
fire or product damage which may not be covered by the warranty.
Use only extension cords and outlets that can fully accommodate the display's polarized
l
plug.
i smarttech.com/kb/171288