Commands And Responses - SMART Board SBID-MX165 Installation And Maintenance Manual

CHAPTER B
REMOTELY MANAGING THE DISPLAY
Power state Description
UPDATEREADY The display is updating firmware while the screen is off. Do not turn off the
display.
With the exception of get powerstate and set powerstate, commands are available only when
the display is in ON power state.

Commands and responses

Commands consist of a command argument, property affected, operator symbol and a value to
apply.
CORRECT
>set input=hdmi1
INCORRECT
>set hdmi1
To use the room control system to get information about the display or to adjust display settings,
type commands after the command prompt (>), and then wait for the display's response.
CORRECT
>get volume
volume=55
>
If you type a command that the room control system doesn't recognize, you receive an invalid
command response.
The example contains an extra space in the volume command.
INCORRECT
>set vol ume=65
invalid cmd=set vol ume=65
>
64 smarttech.com/kb/171288