SMART Board SBID-MX165 Installation And Maintenance Manual page 4

Table of Contents

Advertisement

IMPORTANT INFORMATION
Use the power cable provided with the display. If a power cable is not supplied, contact
l
your supplier. Use only power cables that match the AC voltage of the power outlet and that
comply with your country's safety standards.
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
l
fragments with care when disposing of them.
Do not move or mount the display by connecting rope or wire to its handles. The display is
l
heavy, and failure of the rope, wire or handle could lead to injury.
Use only VESA®-approved mounts if using a mount other than the one supplied with the
l
display..
Disconnect all of the display's power cables from the wall outlet and seek assistance from
l
qualified service personnel if any of the following occur:
The power cable or plug is damaged
o
Liquid is spilled into the display
o
Objects fall into the display
o
The display is dropped
o
Structural damage, such as cracking, occurs
o
The display behaves unexpectedly when you follow operating instructions
o
CAUTION
Turn off the display before cleaning its screen. Otherwise, you may scramble the desktop
l
icons or inadvertently activate applications when you wipe the screen.
Avoid setting up and using the SMART product in an area with excessive levels of dust,
l
humidity and smoke.
Make sure an electrical socket is near the SMART product and remains easily accessible
l
during use.
The SMART product should be used only with European TN and TT power distribution
l
systems.
It is not suitable for older, IT-type power distribution systems found in some European
countries. This system (IT-type) is widely used isolated from earth, in some installations in
France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral
not distributed, at 230V line-to-line.
Contact qualified personnel if you're uncertain of the type of power system available where
you're installing the SMART product.
ii
smarttech.com/kb/171288

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbid-mx186Mx100 seriesSbid-mx175

Table of Contents