Chapter 3
Connecting computers and other devices
NOTE
If you connect an external speaker system to the display using the Sony/Philips Digital Interface (S/PDIF)
out connector and the audio source device is connected to the display using an HDMI 2.0 connection,
the external speaker system must support HDCP 2.2. For more information, see
flat panels and High-bandwidth Digital Content Protection
Connecting room control systems
A room control system enables users to control a room's lighting, audio system and, possibly, the display.
Some installations may require you to integrate the display with a room control system.
You can use the display's RS-232 connector to connect a third-party external control system to the display
(see Appendix B: Managing the display using RS-232 on page 66).
NOTE
Displays are not compatible with centralized remote control systems, such as a universal remote control.
Connector diagrams
Connector panel
The following diagram and table present the connectors on the display's connector panel:
Side
smarttech.com/kb/171414
SMART Board interactive
(HDCP).
Bottom
39