SMART Board SBID-MX165 Installation And Maintenance Manual page 40

CHAPTER 4
CONFIGURING THE DISPLAY
To connect to a Wi-Fi network
1. On the display, tap the Home button
2. Tap Settings.
3. Tap Network.
4. Ensure Wi-Fi is enabled and Ethernet is disabled.
5. Select a wireless network.
If the Wi-Fi network is not password protected, the display connects to the network.
6. If the network requires a password, enter the Wi-Fi password and tap Connect.
OR
If the network requires a user name and password, enter the user name and Wi-Fi password
and tap Connect.
To connect to an Ethernet network
1. Connect an Ethernet cable to the RJ45 receptacle on the display.
2. Tap Settings.
3. Tap Network.
4. Ensure Ethernet is enabled and Wi-Fi is disabled.
To configure a proxy for a wireless network
1. On the display, tap the Home button
2. Tap Settings.
3. Tap Network.
4. Ensure Wi-Fi is enabled and Ethernet is disabled.
5. Tap the network to which you're adding a proxy.
6. Select the Advanced options checkbox.
7. In the Proxy field, tap the drop-down box and select Manual.
8. Enter the information in the Hostname, Port and Bypass proxy boxes.
9. Tap Connect.
32 smarttech.com/kb/171288
on the screen to open the launcher.
on the screen to open the launcher.