Update - SMART Board SBID-MX165 Installation And Maintenance Manual

APPENDIX A
USING DISPLAY AND E³ EXPERIENCE SETTINGS ON YOUR SMART BOARD MX100
Option
Input method
Brightness and volume
Auto
Manual
Volume
OTA sever
Power saving mode

Update

Option
Firmware version

Update

58 smarttech.com/kb/171288
Values Function
Android Sets the on-screen keyboard option [N/A]
keyboard
(ASOP)
[Simplified
Chinese]
[N/A] Adjusts the display's brightness
automatically
[N/A] Sets the display's brightness
[N/A] Sets the display's volume
[OTA servers] Chooses the server the display
connects to for updates
NOTE
The display must be connected
to the Internet to check for
system software updates.
Enable Turns power saving mode on or off
Disable
Values Function
[N/A] Shows technical information about
the display's scalar firmware.
[N/A] Checks for updates to the system
software
Notes
The ambient light sensor can detect
the room brightness and adjust the
display's screen brightness
Disable Auto to set the brightness
manually
[N/A]
Default is Auto.
Enabled by default.
When enabled, power saving mode
activates after 90 minutes of
inactivity.
Enabling Power saving mode
makes RS-232 control of the display
unavailable until the display is
turned on using the power button
on the front control panel .
Notes
To see the e³ experience system
software's version use the About
option (see About on the facing
page).
If an update is available, the text
changes to Apply update now.
NOTE
The display must be connected
to the Internet to check for
system software updates. Check
the display's network settings.
To check the network settings,
see Network on page 56.