Configuring The Display's Network Connection; Connecting The Display To A Network - SMART Board SBID-MX165 Installation And Maintenance Manual

CHAPTER 4
CONFIGURING THE DISPLAY
connecting, your organization's network administrators need to configure the network for the
display.

Configuring the display's network connection

Network administrators need to configure the network so users can use the EShare app and
update the system software automatically over the air.
NOTE
Using a 5 GHz wireless network connection may provide a better experience with the EShare
app.
To configure the network
1. Open the required TCP/UDP ports:
Protocol
TCP
TCP
TCP
TCP
TCP
TCP
UDP
UDP
2. Add h1.ee-share.com to the network whitelist.
3. Configure the wireless network to enable broadcast service.
4. Configure the network to allow mDNS (multicast).

Connecting the display to a network

The display can connect to a network using either Wi-Fi or an Ethernet connection. Network
administrators can also add a browser proxy or install a certificate.
31 smarttech.com/kb/171288
Port range
80
56789
25123
8121
8000
8001
48689
25123
Feature
e³ experience system
software update
EShare app
EShare app
EShare app
EShare app
EShare app
EShare app
EShare app