NEC Express5800 series User Manual page 120

A
B
2. Carefully pull on the carrier handle and slide the carrier out of the bay.
3. Install a new drive into the carrier.
4. Hold the carrier handle in the fully open position and slide the carrier into
the desired bay.
5. Push the carrier into the drive bay until the carrier handle latch engages the
locking slot in the edge of the drive bay (Figure 4-28, C).
6. Push the handle closed until it clicks into position.
A
B
4-38 Upgrading Your System
C
B
A
Handle C Locking slot
Latch
Figure 4-27. Removing a Drive Carrier
C
B
A
Handle C Locking slot
Latch
Figure 4-28. Installing a Drive Carrier