Adaptec Scsi Utility Configuration Settings - NEC Express5800 series User Manual

Adaptec SCSI Utility Configuration Settings

The following keys are active for all Adaptec SCSI Utility screens:
Key Action
Arrows Up and down arrows move from one parameter to another within a screen.
ENTER Displays options for a configurable parameter. Selects an option.
ESC Moves back to previous screen or parameter or EXIT if at the Main menu.
F5 Switches between color and monochrome.
F6 Resets to host adapter defaults.
Table 3-2 shows the normal settings for the Adaptec SCSI Utility and provides a
place for you to record any changes you make to these settings.
Table 3-2 Adaptec SCSI Utility Setup Configurations
OPTION
SCSI Bus Interface Definitions
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Additional Options
Boot Device Options
Boot Channel
Boot SCSI ID
Boot LUN Number
SCSI Device Configuration
Sync Transfer Rate (MB/Sec)
Initiate Wide Negotiation
Enable Disconnection
Send Start Unit Command
Enable Write Back Cache
BIOS Multiple LUN Support
Include in BIOS Scan
Advanced Configuration Options
Plug and Play SCAM Support
Reset SCSI Bus at IC Initialization
Display <Ctrl-A> Messages During BIOS
Initialization
RECOMMENDED SETTING
OR DISPLAY ONLY
7
Enabled
Enabled
Press ENTER for menu
A First
0
0
Press ENTER for menu
160
Yes
Yes
Yes
No
1
No
1
Yes
Press ENTER for menu.
Disabled
Enabled
Enabled
Configuring Your System 3-22
YOUR
CONFIGURATION