NEC Express5800 series User Manual page 153

Table 5-1. POST Error Codes and Messages (continued)
Error Code and Message
8162 Mismatched processor
speed detected on
processor #3
8163 Mismatched processor
speed detected on
processor #4
Beeps Error
1-2-2-3 ROM Checksum Error
1-3-1-1 DRAM Refresh Test Error
1-3-1-3 Keyboard Controller Error
1-3-3-1 Memory Not Detected or Incorrect
DIMM Type
1-3-4-3 All Memory Group Errors
2-2-3-1 Illegal Interrupt Test Error
1-2 Video BIOS Initialization Error
1-2 Option ROM Initialization Error
Description
Mismatched processor speed
detected on processor #3
Mismatched processor speed
detected on processor #4
Table 5-2. Post Error Beep Codes
Recommended Action
Power cycle the server. If the same error still occurs, call your
service representative.
Check if memory board and memory DIMMs are installed
correctly. If the same error still occurs, call your service
representative.
Check keyboard connections. If the same error still occurs,
call your service representative.
Check if memory board and DIMMs are installed correctly.
Change memory DIMM's. If the same error still occurs, call
your service representative.
Check if memory board and DIMMs are installed correctly. If
the same error still occurs, call your service representative.
Check system board. If the same error still occurs, call your
service representative.
Check display monitor connections and also power cycle the
server. If the same error still occurs, call your service
representative.
Check ROM BIOS setting in BIOS Setup. Reinstall the PCI
board. Check system board. If the same error still occurs, call
your service representative.
Action
Problem Solving 5-21