NEC Express5800 series User Manual page 148

Table 5-1. POST Error Codes and Messages (continued)
Error Code and Message
0B28 Unsupported CPU
detected for CPU 1
0B29 Unsupported CPU
detected for CPU 2
0B2A Unsupported CPU
detected for CPU 3
0B2B Unsupported CPU
detected for CPU 4
0B30 Fan Alarm 1 – 6
| occurred.
0B35
0B50 CPU #1 with error
taken off line.
0B51 CPU #2 with error
taken off line.
0B52 CPU #3 with error
taken off line.
0B53 CPU #4 with error
taken off line.
0B5F Forced to use CPU
with error
0B60 DIMM group #1 has
been disabled
0B61 DIMM group #2 has
been disabled
0B62 DIMM group #3 has
been disabled
0B70 An error occurred
during temperature
sensor reading
0B71 System Temperature
out of range
0B74 An error occurred
during voltage
sensor reading
0B75 System Voltage out
of range
0B78 An error occurred
during fan sensor
reading
5-16 Problem Solving
Description
This server does not support the
installed CPU.
Fan error
Because an error was detected in
CPU #1, it was degraded.
Because an error was detected in
CPU #2, it was degraded.
Because an error was detected in
CPU #3, it was degraded.
Because an error was detected in
CPU #4, it was degraded.
CPU error is detected.
A memory error was detected in
memory DIMM group #1. Memory
DIMM group #1 is degraded.
A memory error was detected in
memory DIMM group #2. Memory
DIMM group #2 is degraded.
A memory error was detected in
memory DIMM group #3. Memory
DIMM group #3 is degraded.
An error occurred during sensor
polling.
Abnormal temperature was
detected.
An error occurred during detection
of voltage.
Abnormal system voltage was
detected.
An error was detected during read
of FAN sensor.
Action
Contact your service representative for an
approved list of CPUs.
Contact your service representative to
replace the faulty fan indicated in the system
event log.
The displayed CPU is degraded. Contact
your service representative to replace the
failed CPU.
The system is started forcibly because
errors are detected on all CPUs. Contact
your service representative to replace the
CPU.
Contact your service representative to
replace the DIMMs.
Contact your service representative.