Advanced Menu - NEC Express5800 series User Manual

Advanced Menu

Option
Memory Configuration
PCI Configuration
I/O Device Configuration
Advanced Chipset Control
Boot-time
Diagnostic
Screen
Reset
Configuration
Data
NumLock
Memory/Process
or Error
Parameter Description
Press ENTER Refer to the Memory Configuration
submenu
Press ENTER Refer to the PCI Configuration
submenu
Press ENTER Refer to the I/O Device Configuration
submenu
Press ENTER
Refer to the Advanced Chipset
Control submenu
Disabled
Specify whether the self-diagnosis
Enabled (POST) running screen is displayed
or not on booting. If this item is set to
"Disabled," the "NEC" logo appears
during POST. Pressing ESC in the
status causes the screen display to
be switched to the POST execution
screen.
The Boot-time Diagnostic Screen is
automatically enabled if Console
Redirection is enabled.
No Select "Yes" to clear the extended
Yes system configuration data area
(system information stored by POST).
The parameter is changed to "No"
after the system is rebooted.
On Specify whether the numlock is
Off
enabled or disabled on booting.
"Auto" makes the numlock enabled
when an entry from the numeric key
card is detected.
Boot Disables or enables a pause during
Halt system bootup if an error occurs. If
Enabled and an error occurs, the
bootup sequence pauses and offers
the choice of entering BIOS Setup or
resuming the boot sequence (the
system always continues to bootup if
the POST error pause is disabled). If
Disabled, the system always
continues to bootup.
Your Setting
Configuring Your System 3-8