9903-Udx-Adda Rear I/O Modules - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

2

9903-UDX-ADDA Rear I/O Modules

Table 2-1 9903-UDX-ADDA Rear I/O Modules
9903-UDX-ADDA Rear I/O Module
RM20-9903-B
RM20-9903-D
2-4
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9903-UDX-ADDA.
Notes: Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied with
removable screw terminal block adapters. For clarity, the adapters are
omitted in the drawings below.
9903-UDX-ADDA PRODUCT MANUAL
Description
Provides the following connections:
• One 3G/HD/SD-SDI input BNC (SDI IN)
• One analog video CVBS coaxial input BNC
(CVBS IN)
• Two analog balanced audio inputs (AN-AUD IN 1
and AN-AUD IN 2)
• Two AES input BNCs (AES IN 1 and AES IN 2)
• One 3G/HD/SD-SDI output BNC (SDI OUT)
• One analog video CVBS coaxial output BNC
(CVBS OUT)
• Two analog balanced audio outputs
(AN-AUD OUT 1 and AN-AUD OUT 2)
• Two AES output BNCs (AES OUT 1 and
AES OUT 2)
Provides the following connections:
• Two 3G/HD/SD-SDI inputs (SDI IN A and
SDI IN B)
• One CVBS video input (CVBS IN)
• Two analog balanced audio inputs (AN-AUD IN 1
and AN-AUD IN 2)
• Eight AES audio inputs (AES IN 1 thru AES IN 8)
• Two 3G/HD/SD-SDI outputs (SDI OUT 1 and
SDI OUT 2)
• One CVBS video output (CVBS OUT)
• Two analog balanced audio outputs
(AN-AUD OUT 1 and AN-AUD OUT 2)
• Eight AES audio outputs (AES OUT 1 thru
AES OUT 8)
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9903-D-HDBNC or RM20-9903-D-DIN,
respectively.
Installing a Rear I/O Module
9903UDXADDA-OM (V1.5)