Cobalt Digital Inc 9903-UDX-ADDA Product Manual page 29

Installation and Setup
Table 2-1 9903-UDX-ADDA Rear I/O Modules — continued
9903-UDX-ADDA Rear I/O Module
RM20-9903-E
RM20-9903-F
9903UDXADDA-OM (V1.5)
Provides the following connections:
• One 3G/HD/SD-SDI input BNC (SDI IN A)
• One CVBS/component analog video input (BNC)
(Y/Cmpst IN, Pr/C IN, Pb IN)
• One AES audio input BNC (AES IN 1)
• Two analog balanced audio inputs (AN-AUD IN 1
and AN-AUD IN 2)
• Two 3G/HD/SD-SDI output BNCs (SDI OUT 1 and
SDI OUT 2)
• COMM/GPIO RJ-45 connector. Provides the
following:
- Multi-format serial interface
- Two opto-isolated GPI inputs
- Two opto-coupled GPO (GPO 1/G and GPO 2/G)
Note: Refer to GPIO, Serial (COMM), and Analog
Audio Connections (p. 2-7) for connector pinouts
and important information regarding GPO electrical
limits.
Provides the following connections:
• Two 3G/HD/SD-SDI input BNCs (SDI IN A and
SDI IN B)
• One 3G/HD/SD-SDI output BNC (SDI OUT 1)
• One CVBS/component analog video output (BNC)
(Y/Cmpst OUT, Pr/C OUT, Pb OUT)
• One AES audio output (AES OUT 1)
• Two analog balanced audio outputs
(AN-AUD OUT 1 and AN-AUD OUT 2)
• COMM/GPIO RJ-45 connector. Provides the
following:
- Multi-format serial interface
- Two opto-isolated GPI inputs
- Two opto-coupled GPO (GPO 1/G and GPO 2/G)
Note: Refer to GPIO, Serial (COMM), and Analog
Audio Connections (p. 2-7) for connector pinouts
and important information regarding GPO electrical
limits.
9903-UDX-ADDA PRODUCT MANUAL
Installing a Rear I/O Module
Description
2-5