Cobalt Digital Inc 9903-UDX-ADDA Product Manual page 64

3
Table 3-2 9903-UDX-ADDA Function Menu List — continued
Note:
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should
be set to the Silence selection.
• Flex Mix Input Channel Source/Bus
Assignment
• Gain / Mute Control
3-32
9903-UDX-ADDA Function Menu List and Descriptions
Output Flex Mix – Provides a 16-channel mixer in which each of the
inputs can be mixed onto up to 16 independent output summing
nodes. Each input channel has independent gain and mute controls.
Input Flex Mix
In this example three of the 16 flex bus summing nodes are used to sum
groups 1 thru 3 into three outputs (Flex Mix A thru Flex Mix C). These
summed outputs can then be outputted on any of the card's audio outputs.
Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Audio Bus Ch 1 thru Ch 16
• Tones 1 thru 16
• Downmix L or Downmix R
The Flex Bus drop-down selects the bus (A thru P) to which the input is
assigned to.
Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
9903-UDX-ADDA PRODUCT MANUAL 9903UDXADDA-OM (V1.5)