9902-Udx Rear I/O Modules; Technical Specifications - Cobalt Digital Inc 9902-UDX Product Manual

1

9902-UDX Rear I/O Modules

Technical Specifications

Table 1-1 Technical Specifications
Item
Part number, nomenclature
Installation/usage environment
Power consumption
Installation Density
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
Indicators
1-18
The 9902-UDX physically interfaces to system video connections at the rear
of its frame using a Rear I/O Module.
All inputs and outputs shown in the 9902-UDX Functional Block Diagram
(Figure 1-1) enter and exit the card via the card edge backplane connector.
The Rear I/O Module breaks out the 9902-UDX card edge connections to
BNC and other connectors that interface with other components and systems
in the signal chain.
The full assortment of 9902-UDX Rear I/O Modules is shown and described
in 9902-UDX Rear I/O Modules (p. 2-4) in Chapter 2, "Installation and
Setup".
Table 1-1 lists the technical specifications for the 9902-UDX Multi-Input
Up-Down-Cross Converter/Framesync with Auto-Changeover and Character
Burn card.
9902-UDX 3G/HD/SD-SDI Up-Down-Cross Converter/Framesync/
Audio Embed/De-Embed with Multi-Input Auto-Changeover
Intended for installation and usage in frame meeting openGear™
modular system definition.
< 18 Watts maximum
Up to 20 cards per 20-slot frame
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100 Mbps Ethernet with Auto-MDIX.
Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Presence LED indicators
9902-UDX PRODUCT MANUAL
Technical Specifications
Characteristic
9902UDX-OM (V1.3)