Scaler - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

Operating Instructions
Table 3-2 9903-UDX-ADDA Function Menu List — continued
• Scaler Enable Control
• Input/Output Video Status
• Output Format Selector
• Scaler Follow AFD Enable/Disable
• Noise Reduction/Detail Enhancement
Controls
9903UDXADDA-OM (V1.5)
9903-UDX-ADDA Function Menu List and Descriptions
Provides up/down/cross-converter, aspect ratio
controls, and user H/V controls.

Scaler

Enables or disables Scaler function.
Note: When scaler is disabled, all ancillary data is passed from input to
output intact. If the scaler is enabled, ancillary data such as
timecode and closed captioning must be set for re-insertion as
desired. See Timecode (p. 3-39) and Closed Captioning (p. 3-44)
for more information about insertion into scaled output video.
Displays signal format/status sent to scaler and output format/status.
If invalid or no signal is present, none is displayed.
Provides conversions to formats as shown.
Sets scaler to automatically follow incoming AFD ARC control.
Note: • The Scaler follow AFD control also appears on the AFD/WSS/VI
tab and is mutually ganged with the selection performed on either
tab. Refer to AFD/WSS/VI Code Insertion Controls (p. 3-33) for
more information.
Provides individual Noise Reduction and Detail Enhancement controls for
optimizing scaled output where source is not optimum for scaled format.
Optimum setting results in overall perception of increased sharpness,
while avoiding pattern noise artefacts.
9903-UDX-ADDA PRODUCT MANUAL
3-13