9903-Udx-Adda Rear I/O Modules; Technical Specifications - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

1

9903-UDX-ADDA Rear I/O Modules

Technical Specifications

Table 1-1 Technical Specifications
Item
Part number, nomenclature
Installation/usage environment
Power consumption
Installation Density
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
Indicators
Serial Digital Video Input
1-16
The 9903-UDX-ADDA physically interfaces to system video connections at
the rear of its frame using a Rear I/O Module.
All inputs and outputs shown in the 9903-UDX-ADDA Functional Block
Diagram (Figure 1-1) enter and exit the card via the card edge backplane
connector. The Rear I/O Module breaks out the 9903-UDX-ADDA card edge
connections to BNC and other connectors that interface with other
components and systems in the signal chain.
The full assortment of 9903-UDX-ADDA Rear I/O Modules is shown and
described in 9903-UDX-ADDA Rear I/O Modules (p. 2-4) in Chapter 2,
"Installation and Setup".
Table 1-1 lists the technical specifications for the 9903-UDX-ADDA 3G/HD/
SD-SDI Universal UDX Format Converter/Frame Sync with CVBS/YPbPr
Video I/O, AES and Analog Audio Embedding / De-Embedding card.
9903-UDX-ADDA 3G/HD/SD-SDI Universal UDX Format
Converter/Frame Sync with CVBS/YPbPr Video I/O, AES and
Analog Audio Embedding / De-Embedding
Intended for installation and usage in frame meeting openGear™
modular system definition
< 13 Watts maximum
Up to 20 cards per 20-slot frame
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100/1000 Mbps Ethernet with Auto-MDIX
Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Presence LED indicators
Number of Inputs:
Up to two 75Ω BNC, with manual select or failover to alternate
input.
SDI Formats Supported: SMPTE 259M, SMPTE 292M,
SMPTE 424M
9903-UDX-ADDA PRODUCT MANUAL
Technical Specifications
Characteristic
9903UDXADDA-OM (V1.5)