9926-Xhtos Rear I/O Modules; Technical Specifications - Cobalt Digital Inc 9926-xHtoS Product Manual

Introduction

9926-xHtoS Rear I/O Modules

Technical Specifications

Table 1-1 Technical Specifications
Item
Part number, nomenclature
Power
Installation/usage environment
Installation Density
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
Standards Supported
HDMI Inputs
3G/HD/SD-SDI Outputs
9926-xHtoS-OM (V1.2)
The 9926-xHtoS physically interfaces to system video connections at the rear
of its frame using a Rear I/O Module.
All inputs and outputs shown in the 9926-xHtoS Functional Block Diagram
(Figure 1-1) enter and exit the card via the card edge backplane connector.
The Rear I/O Module breaks out the 9926-xHtoS card edge connections to
coaxial and other connectors that interface with other components and
systems in the signal chain.
The full assortment of 9926-xHtoS Rear I/O Modules is shown and described
in 9926-xHtoS Rear I/O Modules (p. 2-4) in Chapter 2, "Installation and
Setup".
Table 1-1 lists the technical specifications for the 9926-xHtoS cards.
• 9926-4HtoS 3G/HD/SD Quad-Channel openGear
HDMI-To-SDI Converter with Per-Channel Frame Sync
• 9926-2HtoS 3G/HD/SD Dual-Channel openGear
Converter with Per-Channel Frame Sync
49 Watts
Intended for installation and usage in frame meeting openGear™
modular system definition
Up to 7 cards per 20-slot frame as follows:
• OG3 Frame: (5) cards
• HPF-9000 Frame: (5) cards
• oGx Frame: (7) cards
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100/1000 Mbps Ethernet with Auto-MDIX
SMPTE 259M, 292M, 424M
• 9926-4HtoS: (4) HDMI 2.0; mini connectors
• 9926-2HtoS: (2) HDMI 2.0; mini connectors
• 9926-4HtoS: (4) 75Ω outputs (max)
• 9926-2HtoS: (2) 75Ω outputs (max)
Output Signal Level: 800 mV ±10%
DC Offset: 0 V ± 50 mV
Alignment Jitter (3G/HD/SD): < 0.3/0.2/0.2 UI
9926-XHTOS PRODUCT MANUAL
Technical Specifications
Characteristic
®
®
HDMI-To-SDI
1-13