Input Video Controls - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

Operating Instructions
Table 3-2 9903-UDX-ADDA Function Menu List

Input Video Controls

• Allowed Raster Size/Rate Filters
Checkboxes set the input video filter to only accept selected raster sizes and frame rates (in this example, the user settings acccept
only standard HD raster sizes/types of 720p, 1080i, and 1080p with NTSC frame rates of 29.97 and 59.94).
Note: Factory default has all checkboxes check, thereby performing no filtering.
• Input Video Source
• Analog Video Input Type Control
9903UDXADDA-OM (V1.5)
9903-UDX-ADDA Function Menu List and Descriptions
Allows manual or failover selection of card SDI and
analog program video inputs and displays status and
raster format of received video.
Sets the card SDI input to filter for and accept only user-specified raster
sizes and rates (inputs not meeting raster size/rate settings are rejected
and show as Unlocked).
Selects the input video source to be applied to the card's program video
input.
• SDI A and SDI B choices allow forced manual selection of
correspondingly SDI IN A or SDI IN B.
• Failover A to B sets main path preference of SDI IN A.
- If SDI IN A goes invalid, then SDI IN B is selected.
- If SDI IN A goes valid again, failover automatically reverts to
SDI IN A.
• Failover B to A sets main path preference of SDI IN B.
- If SDI IN B goes invalid, then SDI IN A is selected.
- If SDI IN B goes valid again, failover automatically reverts to
SDI IN B.
• Analog – select CVBS or component input as the program video
input.
When receiving analog video input, Analog Input Mode drop-down sets
the card to accept received input signal from choices shown.
Analog Input button sets the card input to match analog source
containing or not containing 7.5 IRE pedestal.
Note: Input type must be appropriately set for the card to correctly
process the received input.
9903-UDX-ADDA PRODUCT MANUAL
3-11