Chapter 3 Operating Instructions; Overview; Control And Display Descriptions - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

Overview

If you are already familiar with
using DashBoard or a Cobalt
Remote Control Panel to control
Cobalt cards, please skip to
9903-UDX-ADDA Function Menu
List and Descriptions (p. 3-10).

Control and Display Descriptions

9903UDXADDA-OM (V1.5)
Operating Instructions
Chapter 3
This chapter contains the following information:
Control and Display Descriptions (p. 3-1)
•
Accessing the 9903-UDX-ADDA Card via Remote Control (p. 3-6)
•
Checking 9903-UDX-ADDA Card Information (p. 3-8)
•
Ancillary Data Line Number Locations and Ranges (p. 3-9)
•
9903-UDX-ADDA Function Menu List and Descriptions (p. 3-10)
•
Troubleshooting (p. 3-58)
•
This section describes the user interface controls, indicators, and displays for
using the 9903-UDX-ADDA card. The 9903-UDX-ADDA functions can be
accessed and controlled using any of the user interfaces described here.
The format in which the 9903-UDX-ADDA functional controls, indicators,
and displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the
9903-UDX-ADDA functions (and the controls, indicators, and displays
related to a particular function) follows a general arrangement of Function
Menus under which related controls can be accessed (as described in Function
Menu/Parameter Overview below).
Note: When a setting is changed, settings displayed on DashBoard™ (or a Remote
Control Panel) are the settings as effected by the card itself and reported back
to the remote control; the value displayed at any time is the actual value as set
on the card.
9903-UDX-ADDA PRODUCT MANUAL
Chapter 3
3-1